unisonic technologies co., ltd pzt2222a npn silicon transistor www.unisonic.com.tw 1 of 6 copyright ? 2012 unisonic technologies co., ltd qw-r207-001.d npn general purpose amplifier ? features * this device is for use as a medium power amplifier and switch requiring collector currents up to 500ma. sot-223 1 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 pzt2222al-aa3-r PZT2222AG-AA3-R sot-223 b c e tape reel (1) r: tape reel (2) aa3: sot-223 (3) g: halogen free, l: lead free pzt2222al-aa3-r (1)packing type (2)package type (3)lead free
pzt2222a npn silicon transistor unisonic technologies co., ltd 2 of 6 www.unisonic.com.tw qw-r207-001.d ? absolute maximum rating (t a =25c, unless otherwise specified) parameter symbol ratings unit collector-base voltage v cbo 75 v collector-emitter voltage v ceo 40 v emitter-base voltage v ebo 6 v collector current i c 0.6 a total device dissipation p c 1 w junction temperature t j +150 c storage temperature t stg -55 ~ +150 c note: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. these are steady state lim its. the factory should be consulted on ap plications involving pulsed or low duty cycle operations. ? thermal data (t a =25c, unless otherwise specified) parameter symbol ratings unit junction to ambient ja 125 c/w ? electrical characteristics (t a =25c, unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics collector-base breakdown voltage bv cbo i c =10 a, i e =0 75 v collector-emitter breakdown voltage bv ceo i c =10ma, i b =0 40 v emitter-base breakdown voltage bv ebo i e =10 a, i c =0 6 v collector cut-off current i ceo v ce =60v, v eb ( off ) =3.0v 10 na collector cut-off current i cbo v cb =60v, i e =0 0.01 a v cb =60v,i e =0, t a =150c 10 emitter cut-off current i ebo v eb =3.0v, i c =0 10 na base cut-off current i bl v ce =60v, v eb ( off ) =3.0v 20 na on characteristics dc current gain h fe i c =0.1ma, v ce =10v 35 i c =1.0ma, v ce =10v 50 i c =10ma, v ce =10v 75 i c =10ma, v ce =10v, t a =-55c 35 i c =150ma, v ce =10v (note) 100 i c =150ma, v ce =1.0v (note) 50 300 i c =500ma, v ce =10v (note) 40 collector-emitter sa turation voltage (note) v ce(sat) i c =150ma, i b =15ma 0.3 v i c =500ma, i b =50ma 1.0 base-emitter satu ration voltage (note) v be(sat) i c =150ma, i b =15ma 0.6 1.2 v i c =500ma, i b =50ma 2.0 small signal characteristics transition frequency f t i c =20ma, v ce =20v, f=100mhz 300 mhz output capacitance c obo v cb =10v, i e =0, f=100khz 8.0 pf input capacitance c ibo v eb =0.5v, i c =0, f=100khz 25 pf collector base time constant r b 'c c i c =20ma, v cb =20v, f=31.8mhz 150 ps noise figure nf i c =100 a, v ce =10v, r s =1.0k ? , f=1.0khz 4.0 db real part of common-emitter high frequency input impedance r e(hje) i c =20ma, v cb =20v, f=300mhz 60 ?
pzt2222a npn silicon transistor unisonic technologies co., ltd 3 of 6 www.unisonic.com.tw qw-r207-001.d ? electrical characteristics (t a =25c, unless otherwise specified) parameter symbol test conditions min typ max unit switching characteristics delay time t d v cc =30v, v be ( off ) =0.5v, 10 ns rise time t r i c =150ma, i b1 =15ma 25 ns storage time t s v cc =30v, i c =150ma, 225 ns fall time t f i b1 = i b2 =15ma 60 ns note: pulse test: pulse width 300 s, duty cycle 2.0%
pzt2222a npn silicon transistor unisonic technologies co., ltd 4 of 6 www.unisonic.com.tw qw-r207-001.d ? test circuit
pzt2222a npn silicon transistor unisonic technologies co., ltd 5 of 6 www.unisonic.com.tw qw-r207-001.d ? typical characteristics
pzt2222a npn silicon transistor unisonic technologies co., ltd 6 of 6 www.unisonic.com.tw qw-r207-001.d ? typical characteristics(cont.) 10 100 1000 160 0 collector current, i c (ma) turn on and turn off times vs. collector current time (ns) 80 240 320 400 v cc =25v t off t on i b1 =i b2 = i c 10 10 100 1000 160 0 collector current, i c (ma) switching times vs. collector current time (ns) 80 240 320 400 v cc =25v t s t f i b1 =i b2 = i c 10 t r t d power dissipation, p d (w) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
